Clean-Energy: Combination boilers pellet / wood

Steel boiler with electronically controlled for pellets and solid biomass such as wood and compressed wood briquettes , with possibility to operate with granular biomass as: peanut husk, nut shells, almond shells, etc. . complete a fuel tank for the automatic feeding and equipped with safety heat exchanger coil.

FEATURES

• Efficiency at 90% with fuel pellets
• Reduced emissions
• Steel body with combustion chamber
• Combustion chamber deep and broad partially coated refractory to ensure:

   - Complete combustion of the air / pellet
   - Cleaning of the walls are wet
   - High energy efficiency

• Insulation of rock wool coat tear of 80 mm thick
• Automatic ignition
• Modulation of four power levels
• Optimization of combustion through modulation of temperature modulation of the boiler flue gas temperature
• Combustion grate in stainless steel AISI 304
• Suction fan located in the fume chamber for combustion optimization
• Control panel with display: on, off release, ACS management
• Signaling proper operation of the probes
• Protection momentary failure voltage
• Overtemperature protection of the boiler water
• Display of the alarms on the display
• Automatic switching of fuel wood / pellet (with load of wood exhausted, the demand for energy pellet feed auger is activated)
• Management of the "storage tank" that allows the combination to kettles
• The pellet tank positioned on 2 sides with respect to the generator
• Combustion chamber in stainless steel AISI 430 (OPTIONAL)